 |
 |
Your service has been installed and now you are
ready to connect your computer and experience VMMICRO.NET
high speed Internet connectivity.
To connect to VMMICRO.NET, you will need the following:
Compatible personal computer*
with Ethernet port or router or hub
Category 5 patch cable
(Cat-5 cable) - to extend from the VMMICRO.NET
wall jack to your computer Ethernet jack
Let’s get started! By following the steps
below, you should be up and running in no time!
Single computer users:
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
|
Notify VMMICRO.NET of your
MAC address if you haven’t already
done so.
Plug one end of the Cat-5 cable into the
VMMICRO.NET wall jack.
Plug the other end into your NIC.
Reboot your computer and launch your Internet
browser. You should now have lightning-fast
service!
If your browser does not connect to the
Internet, follow the "Configuring Internet
Explorer" instructions on the back
of this page. Then, try launching the browser
again. |
Multiple computer users:
Note: If you are connecting multiple computers,
you will need to provide your own router.
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Step 7:
|
Notify VMMICRO.NET
of the MAC address of your router if
you haven’t already done so. For more
information, consult the owner’s manual
of your router.
If you are using a router it will need to
be configured prior to using it. For information
of how to configure your router consult
your owner's manual.
Plug one end of the Cat-5 cable into your
VMMICRO.NET wall jack.
Plug the other end into the WAN jack on
your router.
Note: A hub or switch is not a router.
If your router is also a switch,
make sure each of your computers is plugged
into one of the LAN ports. For more information,
consult the owner’s manual of your
router.
If your router does not contain
a switch, plug the LAN port on
your router into your switch. Make sure
that all of your computers are plugged into
the switch. For more information, consult
the owner’s manual of your router.
Reboot your router.
Reboot each computer and launch your Internet
browser. You should now have lightning-fast
service! |
Still not connected?
Call VMMICRO.NET customer service at
(276) 935-8307. VMMICRO.NET will assist you
in getting up and running. We
do provide computer networking,
network card installation, and
computer setup or maintenance services at an hourly rate.
Email Setup.
For instructions on setting up your VMMICRO.NET
e-mail accounts, go to www.vmmicro.net and
click on the Support tab.
*Compatible personal computers include those with
Windows XP, 2000, Me, 98 and most 95 machines
as well as Macintosh and Linux workstations. Each
computer must support TCP/IP and have it installed
in addition to an available Ethernet port. If
your computer does not have an Ethernet port,
you should be able to add a network card (NIC).
Network cards are available at computer and electronics
stores as well as via numerous online merchants.
|
|
 |
|
|
|
|
|
Installation
Process
